Cap Top, Wiper & Raster Strip Maintenance Guide | Grisprint

Step-by-step cleaning for Mimaki JV33 cap top, Roland raster strip repair, and Epson DX7 wiper kits. Extend printer life with Grisprint global parts.

Industry-proven routine to reduce print failures by 90%.

Why These Parts Matter

Based on global field data, 2024–2025

1. Daily Cap Top Cleaning (Mimaki JV33 / Roland / Mutoh)

5-Step Process

1. Power off → Lift print carriage
2. Remove cap top (Phillips screwdriver)
3. Soak in cleaning fluid → 5 minutes
4. Wipe gently with lint-free cloth (avoid alcohol on rubber)
5. Reinstall → Run test print

Recommended: Replace every 3 months or 500L ink.

Need cap top for Mimaki JV33?

Inquire Now →

2. Weekly Wiper Blade Check (Epson DX5 / DX7)

Quick Inspection

Works with:

Epson L1800, Mutoh VJ-1638, Roland VS series

Looking for DX7 wiper kits?

Inquire Now →

3. Monthly Raster Strip Care (Roland / Mimaki)

Cleaning Steps

1. Power off → Open encoder cover
2. Apply IPA 99% on cloth only
3. Wipe left to right
4. Dry fully before restart

Note: Deep scratches require replacement.

Need Roland raster strip?

Inquire Now →

4. Maintenance Schedule

Part	Daily	Weekly	Monthly	Every 500L Ink
Cap Top	Clean	—	Replace	—
Wiper Blade	—	Clean	Replace	—
Raster Strip	—	—	Clean	Replace if damaged

5. Global Stock & Fast Shipping

We keep 10,000+ SKUs ready for:

Mimaki (JV33, JV300, TS55)

Roland (VS, VG, LEF)

Mutoh, Epson, HP Latex

What you get:

Exact-match parts

Global delivery 

Volume pricing

Fill in your needs — Inquire Now →

quote sent in 24 hours.

Select Part Cap Top Wiper Blade Raster Strip Inquire Now

Last updated: October 28, 2025